SN EN 280-1:2022 vs Other Standards
SN EN 280-1:2022
Fahrbare Hubarbeitsbühnen - Teil 1: Berechnung - Standsicherheit - Bau - Sicherheit - Prüfungen
Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests
INB1.1 This document specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis. NOTE Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs. 1.2 This document is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards. It does not cover the hazards arising from: a) use in potentially explosive atmospheres; b) work from the platform on external live electric systems; c) use of compressed gases for load bearing components; d) getting on and off the work platform at changing levels; e) specific applications (e.g. railway, ships) covered by National or local regulations. 1.3 This document does not apply to: a) machinery serving fixed landings (see e.g. EN 81-20:2020 and EN 81-50:2020, EN 12159:2012); b) fire-fighting and fire rescue appliances (see e.g. EN 1777:2010); c) unguided work cages suspended from lifting appliances (see e.g. EN 1808:2015); d) elevating operator position on rail dependent storage and retrieval equipment (see EN 528:2021); e) tail lifts (see EN 1756-1:2021 and EN 1756-2:2004+A1:2009); f) mast climbing work platforms (see EN 1495:1997+A2:2009); g) fairground equipment; h) lifting tables (see EN 1570-1:2011+A1:2014 and EN 1570-2:2016); i) aircraft ground support equipment (see e.g. EN 1915-1:2013 and EN 1915-2:2001+A1:2009); j) elevating operator positions on industrial trucks (see EN ISO 3691-3:2016). 1.4 Classification: MEWPs are divided into two main groups: a) Group A: MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines. b) Group B: All other MEWPs. Relating to travelling, MEWPs are divided into three types: 1) Type 1: Travelling is only allowed with the MEWP in its transport position; 2) Type 2: Travelling with lifted work platform is controlled from a point of control at the chassis; 3) Type 3: Travelling with lifted work platform is controlled from a point of control at the work platform. NOTE Type 2 and type 3 can be combined.
Publikation: 2022-02-01128 SeitenICS: 53.020.99
SN EN 280-1:2022
Fahrbare Hubarbeitsbühnen - Teil 1: Berechnung - Standsicherheit - Bau - Sicherheit - Prüfungen
Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests
1.1 This document specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis. NOTE Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs. 1.2 This document is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards. It does not cover the hazards arising from: a) use in potentially explosive atmospheres; b) work from the platform on external live electric systems; c) use of compressed gases for load bearing components; d) getting on and off the work platform at changing levels; e) specific applications (e.g. railway, ships) covered by National or local regulations. 1.3 This document does not apply to: a) machinery serving fixed landings (see e.g. EN 81-20:2020 and EN 81-50:2020, EN 12159:2012); b) fire-fighting and fire rescue appliances (see e.g. EN 1777:2010); c) unguided work cages suspended from lifting appliances (see e.g. EN 1808:2015); d) elevating operator position on rail dependent storage and retrieval equipment (see EN 528:2021); e) tail lifts (see EN 1756-1:2021 and EN 1756-2:2004+A1:2009); f) mast climbing work platforms (see EN 1495:1997+A2:2009); g) fairground equipment; h) lifting tables (see EN 1570-1:2011+A1:2014 and EN 1570-2:2016); i) aircraft ground support equipment (see e.g. EN 1915-1:2013 and EN 1915-2:2001+A1:2009); j) elevating operator positions on industrial trucks (see EN ISO 3691-3:2016). 1.4 Classification: MEWPs are divided into two main groups: a) Group A: MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines. b) Group B: All other MEWPs. Relating to travelling, MEWPs are divided into three types: 1) Type 1: Travelling is only allowed with the MEWP in its transport position; 2) Type 2: Travelling with lifted work platform is controlled from a point of control at the chassis; 3) Type 3: Travelling with lifted work platform is controlled from a point of control at the work platform. NOTE Type 2 and type 3 can be combined.
This page compares SN EN 280-1:2022 against other standards to help the reader decide which applies to their situation. Understanding the differences is crucial for compliance and safety in the use of mobile elevating work platforms (MEWPs).
Why compare SN EN 280-1:2022 and SN EN 280-1:2022 vs other standards
The intent behind comparing SN EN 280-1:2022 with other standards is primarily driven by professionals responsible for ensuring safety and regulatory compliance in the operation of MEWPs. These may include safety officers, compliance managers, and engineers. They seek to determine which standard best suits their operational needs, understanding that different standards may impose varying requirements on design, safety measures, and operational protocols. Consequently, the decision on which standard to adopt can significantly impact safety, operational efficacy, and regulatory compliance in various industries, including construction, maintenance, and logistics.
How SN EN 280-1:2022 approaches the topic
SN EN 280-1:2022 provides a comprehensive framework of safety requirements, focusing on the design, stability, and operational safety of mobile elevating work platforms (MEWPs). It outlines essential areas such as:
- Design Calculations: Establishes parameters for strength and stability calculations that manufacturers must adhere to.
- Stability Criteria: Details the required stability assessments to ensure safe operation under various conditions.
- Construction Standards: Specifies materials and construction techniques to enhance safety and reliability.
- Safety Examinations and Tests: Mandates thorough testing and examinations of MEWPs before they are put into service. By addressing these critical areas, SN EN 280-1:2022 aims to standardize safety practices and enhance operational safety across the industry.
How SN EN 280-1:2022 vs other standards approaches the topic
When comparing SN EN 280-1:2022 with other relevant standards, such as ISO 16368 and ANSI/SAIA A92, it's essential to note their differing focuses and methodologies. For instance:
- ISO 16368 emphasizes the operational safety of MEWPs but does not delve as deeply into design calculations as SN EN 280-1:2022.
- ANSI/SAIA A92 provides guidelines specifically for the United States market, focusing on safety and training requirements but may not align with the European stability criteria outlined in SN EN 280-1:2022. These distinctions highlight how different standards cater to varying geographic and regulatory environments while addressing similar safety concerns.
Side-by-side comparison
| Criteria | SN EN 280-1:2022 | Other Standards (e.g., ISO 16368) |
|---|---|---|
| Scope | Mobile elevating work platforms (MEWPs) | General safety for MEWPs |
| Audience | Manufacturers, operators, safety personnel | Manufacturers, operators |
| Cost/Effort | Moderate compliance costs due to detailed requirements | Varies, generally lower compliance cost |
| Certification Mechanism | Requires compliance verification through safety examinations | Limited certification, mainly operational training |
| Typical Use Cases | Construction, maintenance, logistics | General industry use, less specific |
When to choose which
- If you need comprehensive safety criteria for design and stability, choose SN EN 280-1:2022. This standard provides detailed requirements essential for ensuring the reliability of MEWPs in demanding environments.
- If your operations are primarily in the U.S. and focus on operational safety, consider ANSI/SAIA A92, which tailors its guidelines to meet local regulatory requirements.
- If you are looking for a global standard with a broader focus on operational safety, ISO 16368 may be the best fit, as it addresses a wide range of safety considerations without delving deeply into design specifications.
- If cost is a significant factor and your operations are less complex, you might opt for a less stringent standard that simplifies compliance, but be cautious about the implications on safety.